Sponsored

bmwhitetx

Well-known member
First Name
Bruce
Joined
May 21, 2021
Threads
41
Messages
1,783
Reaction score
2,503
Location
DFW-Texas
Vehicles
2022 F150 Lightning Lariat ER
Occupation
Retired engineer
i am still not getting the c/cm on my forscan🤦‍♂️
Maybe you miswired it. Did you look at the link I sent in post 572 and then the ones after it.
Sponsored

 

dr1983

Active member
First Name
dennis
Joined
Dec 19, 2024
Threads
0
Messages
27
Reaction score
0
Vehicles
2022 Ford Lightning XLT
Occupation
Security Advisor
Maybe you miswired it. Did you look at the link I sent in post 572 and then the ones after it.
i have the original wiring and the passenger and driver have both wires
 

B177y

Well-known member
First Name
Bill
Joined
Jul 16, 2024
Threads
3
Messages
152
Reaction score
179
Location
Olympic Peninsula WA
Website
www.ptcoffee.com
Vehicles
2024 Lightning Pro ER Max Tow
Occupation
Coffee Roasting
i am still not getting the c/cm on my forscan🤦‍♂️
Go back to step 1 on the first post and trace your steps all the way through.

I reversed my wiring on the CCM plug, check that. When I fixed it, I was able to then program it successfully. Check ALL of your wiring.

I also didn't understand how to use the ForScan master spreadsheet that is referenced in post 1 on my first attempt. I watched a YouTube video that is posted somewhere in the 20's pages of this thread and learned how to use my stock ForScan values and what I needed to change them to. They were different than the OP's. Understand that step before you start changing ForScan values again.

Don't use the "easy mode" for this mod, it likely won't work.

That is really all of the help that I can suggest.
 

dr1983

Active member
First Name
dennis
Joined
Dec 19, 2024
Threads
0
Messages
27
Reaction score
0
Vehicles
2022 Ford Lightning XLT
Occupation
Security Advisor
Go back to step 1 on the first post and trace your steps all the way through.

I reversed my wiring on the CCM plug, check that. When I fixed it, I was able to then program it successfully. Check ALL of your wiring.

I also didn't understand how to use the ForScan master spreadsheet that is referenced in post 1 on my first attempt. I watched a YouTube video that is posted somewhere in the 20's pages of this thread and learned how to use my stock ForScan values and what I needed to change them to. They were different than the OP's. Understand that step before you start changing ForScan values again.

Don't use the "easy mode" for this mod, it likely won't work.

That is really all of the help that I can suggest.
roger thanks
Sponsored

 
 





Top