Sponsored

CSP 24B56 Front Sensor Fix, Done by dealer but now an issue with my 12v battery?

bydabeach

Well-known member
Joined
Jul 13, 2022
Threads
5
Messages
301
Reaction score
210
Location
NJ
Vehicles
Lighting Lariat ER; Volvo S60 Recharge
I have NOT had the 24b56 front sensor fix done by the dealer yet, and I get the same warning "Electrical System Drain Service Required". Got the warning on my phone App first while I was charging the Lightning (2022 Lariat ER-2 years old this week). After charge was complete and still plugged in, got the warning "Plug in to Maintain 12V Battery." I'm not going to bother doing anything myself and let them have a look at it.
Sponsored

 

puddin

New member
Joined
Dec 2, 2024
Threads
0
Messages
1
Reaction score
0
Vehicles
2023 F-150 Lightning Lariat
Same thing happening to me.

Truck went in yesterday for the same CSP update. Got it back with the weird low quality sensor beeps coming from somewhere. Same low battery “system shutting down to save power” message. App won’t connect since truck goes into that power save mode, so phone as a key unreliable now.

I called and asked if they put the battery on a maintainer during the update. They said they turn the truck on and plug it in so it all runs off the High Voltage Battery instead. The charge history shows they def didn’t plug the HVB in.

I tried to explain that the HVB really only controls the drive and hvac systems, and only charges the 12v in certain scenarios. All other tech stuff runs off the 12v as far as I understand, since it is shared with ICE vehicles.

Pretty disappointed. Going to try and charge the 12v tonight and see if that resolves this.

Did anyone with the sensor beeps coming from a low quality speaker see that resolve with a charged 12v too? That’s a weird thing to have happen with this CSP.
 

TaxmanHog

Moderator
Moderator
First Name
Noel
Joined
Jan 19, 2022
Threads
172
Messages
12,390
Reaction score
13,056
Location
SE. Mass.
Vehicles
2022 Lightning Lariat-ER Max Tow & 2024 Harley-Davidson Road Glide CVO-ST
Occupation
Retired
They said they turn the truck on and plug it in so it all runs off the High Voltage Battery instead.
@Ford Motor Company I know you can only lead the horse to water, but something really needs to be reinforced with these technicians NOT following service procedures!
 

TaxmanHog

Moderator
Moderator
First Name
Noel
Joined
Jan 19, 2022
Threads
172
Messages
12,390
Reaction score
13,056
Location
SE. Mass.
Vehicles
2022 Lightning Lariat-ER Max Tow & 2024 Harley-Davidson Road Glide CVO-ST
Occupation
Retired
Pretty disappointed. Going to try and charge the 12v tonight and see if that resolves this.

Did anyone with the sensor beeps coming from a low quality speaker see that resolve with a charged 12v too? That’s a weird thing to have happen with this CSP.
If it's safe & convenient, you can let the truck recharge the 12v LVB:
  • Start the truck, set parking brake
  • Turn off the 30 minute shutdown timer.
  • Turn off the lights,
  • Turn off the E-HEAT or set lowest temperature (not sure where you are)
  • Set the fan speed manually to above 5 {6/7}
  • Let it run / idle for 4 or 5 hours.
  • Lock doors
 

Jesse-Infotainment

Well-known member
First Name
Jesse
Joined
May 27, 2021
Threads
1
Messages
678
Reaction score
633
Location
Dallas
Vehicles
2021 F150
If the issue happens again.. Unplug the BMS connector at the 12Volt battery then reconnect it.

I had the issue with my lightning after doing updates. Seems the my Power supply I use for all the updates tripped the BMS out.. It was reporting 0% charge for the LVB. I tried everythign even long drive home from work..

All it took was unplug that for a few mins and it was immediately fixed.
 

Sponsored

Maquis

Well-known member
First Name
Dave
Joined
May 20, 2021
Threads
9
Messages
3,481
Reaction score
4,395
Location
Illinois
Vehicles
2021 Mach-E E4-X; 2023 Lightning Lariat ER
If the issue happens again.. Unplug the BMS connector at the 12Volt battery then reconnect it.

I had the issue with my lightning after doing updates. Seems the my Power supply I use for all the updates tripped the BMS out.. It was reporting 0% charge for the LVB. I tried everythign even long drive home from work..

All it took was unplug that for a few mins and it was immediately fixed.
It sounds like you may have connected the power source incorrectly, bypassing the BMS sensor?
 

Jesse-Infotainment

Well-known member
First Name
Jesse
Joined
May 27, 2021
Threads
1
Messages
678
Reaction score
633
Location
Dallas
Vehicles
2021 F150
It sounds like you may have connected the power source incorrectly, bypassing the BMS sensor?
Must be. I dont much about these things.
 

RickLightning

Well-known member
Joined
Jan 17, 2022
Threads
80
Messages
5,018
Reaction score
6,642
Location
SE MI
Vehicles
'22 Lightning ER Lariat,'22 Mach-E Premium 4X
Must be. I dont much about these things.
You do not connect the power supply to the battery, you connect it to the jump posts under the passenger side panel.

The method you follow can result in the BMS not knowing the proper SOC of the 12v battery. Charging the 12v via a Battery Tender, over a few days, returns it to 100%. Then, letting the truck sit locked for 8 hours or more resets the BMS, or you can reset it manually.
 

rugedraw

Well-known member
First Name
Javier
Joined
Dec 14, 2021
Threads
3
Messages
1,212
Reaction score
1,225
Location
Miami
Vehicles
2021 Ford F150 Platinum FX4 EcoBoost; 1990 Ford Mustang LX 5.0 coupe
Occupation
Auto Sales
Just FYI: Jesse was offering advice and not asking for it. He recently got a Lightning for himself, which is GREAT for this community. Outside of maybe Ford engineers, nobody knows more about these things than he does.
 

OMO7

Well-known member
Joined
Apr 26, 2024
Threads
2
Messages
49
Reaction score
39
Location
Canada
Vehicles
23 Lightning
When I had this done they changed the 12V battery after under warranty.
Sponsored

 
 





Top