Ford Power-Up 4.2.4 Modem Connection Issues

[Jif1025]

4.2.4 hit a few minutes ago. Looks like it just addresses the modem connection

Sponsored

 

[Zprime29]

Might want to adjust title to reflect correct version number

I think I need to change my update time or something, I've stuck at "Not completed" for a few weeks now.

 

[GDN]

Well - right on the heels of 4.2.3 yesterday, I just got out for a 10 minute drive. Came home and received the notification for 4.2.4 just installed.

Very little to go on other than minor improvements, calling out specifically to The "FordPass Connect modem".

 

[MichaelCA]

4.2.4 released as well. Maybe my door lock will work more often now instead of pressing the numpad or opening up my app.

 

[GDN]

4.2.4 released as well. Maybe my door lock will work more often now instead of pressing the numpad or opening up my app.

Also just received and created a new thread to keep the conversation specific to the release. https://www.f150lightningforum.com/forum/threads/ford-power-up-4-2-4-update-released.15246/[/QUOTE]

 

[Willebrew]

I also received 4.2.3 yesterday and 4.2.4 today, can't wait to see the upcoming enhancements! Hopefully Ford's adding some requested features.

 

[TaxmanHog]

Split out posts in 4.2.3 to this thread

 

[flyin525]

I also received 4.2.3 yesterday and 4.2.4 today, can't wait to see the upcoming enhancements! Hopefully Ford's adding some requested features.

Same here. Got 4.2.4 today. Hoping to see some new features and some bug fixes like the air dam, departure time and heated steering, and drive logs that tell me I get 80 mi/kWhr - if it does even report the drive happened at all.

 

[Mike G]

So...4.2.3 was a gateway update (GWM) that was apparently a refresh of 4.1.3 according to Tonesto. And the 4.2.4 was a telematics modem (TCU ) update that on the Mach-E enabled leaving feedback for Ford. Nothing to do with doors or other stuff. These are the same updates the Mach-E folks got about a month ago.

I did let the 4.2.3 update as an OTA yesterday on my truck, but I did the 4.2.4 with FDRS this morning.

Tonesto's PowerUp database

 

[Heliian]

. Maybe my door lock will work more often now instead

I found with the fob that it has to be closer to the truck.

 

[Mike G]

4.2.4 released as well. Maybe my door lock will work more often now instead of pressing the numpad or opening up my app.

Maybe you have an RFA update that needs to be applied?

 

[flyin525]

Same here. Got 4.2.4 today. Hoping to see some new features and some bug fixes like the air dam, departure time and heated steering, and drive logs that tell me I get 80 mi/kWhr - if it does even report the drive happened at all.

...And I went to get in the truck for the first drive since this was installed and guess what? powertrain malfunction/Reduced power warning and power capped at 4%. Great.

 

[Mike G]

...And I went to get in the truck for the first drive since this was installed and guess what? powertrain malfunction/Reduced power warning and power capped at 4%. Great.

Did it clear after a power cycle?

 

[flyin525]

Did it clear after a power cycle?

no, I tried disconnecting the battery for 5-10 mins too, error stayed. I had been contacted by Ford already under 23H01 to have a couple modules replaced. So wondering if its related.

 

[MichaelCA]

I found with the fob that it has to be closer to the truck.

I’m referring to PAAK. I don’t think I have issue with fob. Though, the paak issue is like 5% chance the lock button doesnt work.

Maybe you have an RFA update that needs to be applied?

1FT6W1EV5NWG14422 if you wanna take a look, the issue isn’t that dramatic and could easily be a phone issue.

Sponsored