CSP 24B56 - Inoperative Front Parking Sensor(s) - IPMA Software Update for Certain 2022-24 F-150 Lightning Trucks

[BMac1203]

Mine went into the shop for this yesterday. The first update was a success with the second one a failure. They are waiting since yesterday for Ford Tech support to get back with them. I wish I'd have read this before taking it in. I wasn't having any problems just responded to the recall notice.

Same here - I went in for a state inspection and tossed on the recalls because the dealer service portal said I had some; I was thinking "This is great, 2 birds with 1 stone".

BUT - I wasn't having any issues before the recall, but now I am

Sponsored

 

[paulcusick3]

Did you also lose your front camera when approaching things?

I'll check later today

 

[Fast87t]

The link I quoted in my post takes you to the instructions. I installed FORScan, connected to BT dongle, opened FORScan, connected to truck and performed full scan (this took a few min due to slow speed of my cheap OBD reader), backed up the appropriate module, made the change, power cycled the truck, FIXED! All in, spent maybe 15-20 min.

Ok,
When I click the link I get an article and a picture of the dongle and nothing else.

 

[Mashedtators]

360 camera looks like this now:

I remember reading on here there is an extra step to fix this before they return it to you.
Edit: https://www.f150lightningforum.com/...2-24-f-150-lightning-trucks.21145/post-419977

 

[Zprime29]

Ok,
When I click the link I get an article and a picture of the dongle and nothing else.

@paulcusick3
I reference my post to show that it doesn't require an expensive OBD adapter and it has the link to the specific line for the fix. I'll link it here too.
https://www.f150lightningforum.com/...programming-guide-using-fdrs.8249/post-412933

 

[paulcusick3]

I'll check later today

The front camera is turning on when sensors activate. Normal just like prior to the update.

 

[sfringer]

Just had my truck dropped back at the house after getting 24B56 and 24P24 completed. Really appreciate the pick-up service at my local dealer. Picked up just after 9:00AM and back at the house just before 2:30PM.
Now to see how things behave with the parking sensor since I did experience the phantom sensor alerts prior.

 

[Jamchampnate]

Just had my truck dropped back at the house after getting 24B56 and 24P24 completed. Really appreciate the pick-up service at my local dealer. Picked up just after 9:00AM and back at the house just before 2:30PM.
Now to see how things behave with the parking sensor since I did experience the phantom sensor alerts prior.

Keep us posted. Still annoyed it didn’t fix mine and I’m tired of dealership time.

 

[BMac1203]

I'm still hoping someone can fix the front camera not activating w/sensors after the update

 

[CallOnColin]

Just had 24B56, 24P24 and 23C38 done. I didn't have any issues prior, but decided to knock them out to get the better BlueCruise functioning. Turns out 24B56 is a real pain. Tech didn't know a lot about what to do, so I had him abandon the mobile install and drove the truck in. Took 2.5 hours, and they almost installed all three successfully. Two things to make sure they do:

1. Provide power to the 12v throughout the entire installation process.
2. Do NOT skip Step 11 (or perform it incorrectly) for 24B56. If your 360-camera looks like the
attached image with the black borders, it's wrong. Be sure to have them redo with the correct steps and it will fill the screen and have new camera buttons on the left.

Hope this helps!

Sponsored