ECU module programming guide using FDRS

[Pitbull2o08]

i got 1.4. But i'm missing 2 TPMS values.

Sponsored

 

[Mike G]

i got 1.4. But i'm missing 2 TPMS values.

Drive it for 5 minutes.

 

[Jmendozanunez]

What am I doing wrong to connect my mongoose to fdrs and forscan . Says unable to connect ...Installed drivers and I'm able to get fdrs to says connected shows battery volt but when I try to scan Vin says device not connected but when I enter vin manually i click connect bottom symbol says connected ?

 

[Pitbull2o08]

Drive it for 5 minutes.

they came back, thanks

 

[Mike G]

What am I doing wrong to connect my mongoose to fdrs and forscan . Says unable to connect ...Installed drivers and I'm able to get fdrs to says connected shows battery volt but when I try to scan Vin says device not connected but when I enter vin manually i click connect bottom symbol says connected ?

Did you install the VCI manager from the Ford site as well?

 

[Jmendozanunez]

Did you install the VCI manager from the Ford site as well?

Yes I did . After installed that one I got vcm device options...I also can see my driver's are installed shows vehicle pass through and shows mongoose....but just strange I cannot even get forscan to connect

 

[bmwhitetx]

Yes I did . After installed that one I got vcm device options...I also can see my driver's are installed shows vehicle pass through and shows mongoose....but just strange I cannot even get forscan to connect

Is this a known working Mongoose? I haven’t looked but I think the Mongoose driver includes some toolbox programs you could try.
Does the Mongoose blink green when you plug it into the OBD port?

 

[Mike G]

Yes I did . After installed that one I got vcm device options...I also can see my driver's are installed shows vehicle pass through and shows mongoose....but just strange I cannot even get forscan to connect

I'm not sure what to tell you, I've used my Mongoose with FORSCAN plenty of times, but I generally only use the OBDLink MX+ for that (different laptop).

 

[Jmendozanunez]

Is this a known working Mongoose? I haven’t looked but I think the Mongoose driver includes some toolbox programs you could try.
Does the Mongoose blink green when you plug it into the OBD port?

Yes blinks green then solid green. But no communication still

 

[21st Century Truck]

Yes blinks green then solid green. But no communication still

I seem to remember that the Mongoose firmware can be flashed with upgraded more current RAM software... might be worth a look at the manufacturer's website. Not that I've ever done it on the Mongoose... I have done it with other dongle equipment.

Good Luck!

 

[Pitbull2o08]

This video and @mr.Magoo helped with with issues setting up

 

[PJnc284]

Yes I did . After installed that one I got vcm device options...I also can see my driver's are installed shows vehicle pass through and shows mongoose....but just strange I cannot even get forscan to connect

Sure you ordered the Ford version of the Mongoose? Where are you located? Maybe someone near you has a working one you can try. The only thing I recall installing was the Opus IVS Driver and for FORScan I just selected the mongoose on the screen below

Sponsored