Priority Update: 24-PU0105-CMR-FX. Driver Monitoring System

[bmwhitetx]

My understanding is this update was a fix for 6.13 that messed up BC. It has the word FiX right in the name. I got the update yesterday despite not ever getting 6.13.0 last December when it rolled out for a few days. Have not been having any issue with BC either.

Edit - Dang @GDN - we were typing a similar thought at the same time, was not responding to you! JINX.

Sponsored

 

[GDN]

My understanding is this update was a fix for 6.13 that messed up BC. It has the word FiX right in the name. I got the update yesterday despite not ever getting 6.13.0 last December when it rolled out for a few days. Have not been having any issue with BC either.

Edit - Dang @GDN - we were typing a similar thought at the same time, was not responding to you! JINX.

I updated my post to note I did have 6.13. Don't use BC much, but it did work over the weekend.

 

[AmandaB]

I had a failed install of this update today, and then it jumped to a different update from back in 2023, but with totally different verbiage and update details than what everyone else got.

https://www.f150lightningforum.com/forum/threads/priority-update-23-pu0813-dor-up2.17480/post-377385

Mine installed that yesterday, and then today I got the prompt for this one. It is scheduled to install soon.

 

[MichaelCA]

I had the original 6.13.0, no problems with it. Also just got the CMR FX version today as well.

 

[Willebrew]

I had the original 6.13.0, no problems with it. Also just got the CMR FX version today as well.

Same here, I didn’t experience any issues with 6.13 and received 24-PU0105-CMR-FX and 23-PU0813-DOR-UP2 today.

 

[TaxmanHog]

Incoming ...................

Successful update in 40 minutes at 14:58

 

[F150ROD]

I must be cursed

 

[dovetaildan]

Just got the update today. It applied cleanly. I drove after this update and noticed that I only had power on the rear motors though. I recall seeing that somewhere else in the forum. Is there a know resolution to that issue?

 

[Gimme_my_MME]

Just got the update today. It applied cleanly. I drove after this update and noticed that I only had power on the rear motors though. I recall seeing that somewhere else in the forum. Is there a know resolution to that issue?

Likely an artifact if the update. If it doesn't return to normal in a day, that's when you would start wanting to make sure something isn't actually up

 

[dovetaildan]

Likely an artifact if the update. If it doesn't return to normal in a day, that's when you would start wanting to make sure something isn't actually up

Wow, yeah. Waited 2 hours and it is already reset itself. All working and good now.

 

[carys98]

Is this a BlueCruise only update? Has anyone that doesn’t have BlueCruise gotten this update?

 

[TaxmanHog]

Is this a BlueCruise only update? Has anyone that doesn’t have BlueCruise gotten this update?

I have and use Blue Cruise, it worked normally this evening for my coffee run up I-95.

I've never really had much of an issue, but this was a short drive so maybe after a couple 1-2 hour trips I'll see how it's improved.

 

[GoHawks]

Just received this update today. Installed without issue. Never received 6.8 or 6.13. Maybe 6.8 was replaced with something else??

 

[bananaslug79]

Just received this update today. Installed without issue. Never received 6.8 or 6.13. Maybe 6.8 was replaced with something else??

Is the 6.x thing visible somewhere? I can't find anything in FordPass. Does the truck show current software version? I may have just never noticed.

Sparky successfully installed this update and the last one this week too. Something about door locks, mirrors, and lights? *shrug*

 

[TaxmanHog]

Does the truck show current software version? I may have just never noticed.

NO, only the most recent update is shown, from this point forward start a change log to keep track

Sponsored